profile design

Tooth Profile Design of Hobs for Hobbing Regular Polygon Workpieces

滚切正多边形工件的滚刀齿形设计

A Study of Hump Profile Design Theory and Method

驼峰纵断面设计理论及方法研究

The design rules and methods of calibrators for plastic profile extrusion are discussed, and the function and structure of CAE system of calibrators for plastic profile extrusion are also introduced.

讨论了塑料型材挤出定型模的设计原则和设计方法，并介绍了塑料型材挤出定型模计算机辅助设计（CAD）系统的功能与结构。

The Tooth Profile Design of Spline Hobs with Tooth Side and Bottom Grinding Tolerances

留磨花键滚刀的齿形设计

then again, analyze the profile design of the underground garage, including the garage vehicle entrance ramp design, the determination of the garage floors, height adjustment of the underground garage and the main building, and so on.

再次，分析了地下车库剖面设计，主要包括车库车辆出入口的坡道设计，车库层高的确定，车库与地面主体建筑之间高差的调节等。

The important basis on design improvement for cam profile, rocker form and train have been provided.

为凸轮型线 、 摇臂形状和整个配气机构的设计改进提供了重要依据.

Finite element analysis on outer profile design of 295/ 80R22.5 tubeless TBR tire

295/80R22.5无内胎全钢载重子午线轮胎外轮廓设计有限元分析

In this paper, a method of optimum profile design of cylindrical grinding gear hob is given.

本文提出了圆磨齿轮滚刀的优化造形法.该方法使圆磨滚刀的造形精度得到明显提高.

Study on Contact Stress Distribution of Roller Bearings and Roller Profile Design under Misaligned Loads

偏载滚子轴承的接触应力分布计算及其滚子凸度设计

Forth, we present a design technique for directional gain enhancement in low profile tapered slot antennas; we study along a yagi-like dual tapered slot antenna ( DTSA) which features high gain, high front-to-back ratio and broadband characteristics with a short taper profile.

第四，我们提出了渐变槽天线定向增益增强的设计方法。我们同时研究了具有高增益，高前后比和宽带的Yagi形双锥形槽（DTSA）天线。

The Plates have a low profile design, with minimal soft tissue irritation.

钢板为低切迹设计, 减少对软组织的干扰.

Profile Design of Grooved Milling Cutters for Spiral Slot Taps

螺旋槽丝锥沟槽铣刀廓形的设计计算

The key factors in sidetracking well profile design are inter-well distance and well course.

侧斜井井身剖面设计中的关键因素是井间距和各井眼的轨迹.

The seepage stability is solved by width core and thick filter. The paper introduces the design of dam profile, dam material subzone, measures of dam slope earthquake resistance stability, design of foundation treatment and practical operation.

文章介绍了大坝的剖面设计、坝体材料分区、坝坡抗震稳定处理措施、基础处理设计以及实际运行等情况。

Discussion of Temperature Profile Design of Three Temperature Zone Furnace for Crystal Growth

三温区晶体生长炉热场设计探讨

Comparing with the traditional waveguide slot frequency scanning array, In addition to large scan angle and high efficiency, this proposed design is compact, with low profile, and can be easily expanded into a larger array.

与传统波导裂缝频扫阵列相比，该阵列不仅能实现高效率、大角度的频率扫描，还具有低剖面，结构紧凑的优点，并且便于实现大阵列天线的扩展。

Tracing Area Design for Spacecraft The optimization technology of block-wide injection profile control

空间飞行器追踪区设计区块整体调剖优化设计技术研究

A Study of Applicable Computer Software of Hump Profile Design

驼峰纵断面设计应用软件研究

Passenger Ropeway Profile Design System

客运索道侧型设计系统

The feasibility of the new profile design and finite element analysis has been validated by experiments.

实验验证了新造形方法和有限元分析的可行性.

Profile Design and Accuracy Analysis on Gear Hob of Front Rake Angle

正前角齿轮滚刀的齿形设计和精度分析

Mechanism design for on-line profile measuring system of spiral weld steel pipe

螺旋缝焊管截面在线测量系统的机构设计

The twin screw multiphase pump is analyzed with emphases placed on the rotor profile design. Presented are calculation methods of mesh line length and blow hole area.

对邢子文提出的双螺杆多相流混输泵专用型线的几何性能和密封性能进行了探讨，重点讨论了其啮合线、接触线长度及泄漏三角形面积的计算方法。

2, which is found to be more convenient for the engineering design, as it can convert the primal question of transcendental function into that of iterative solution, when the profile of ogee section of a spillway dam is designed.

式（2）用于反弧段廓线计算，可将原超越函数问题变成可迭代求解问题，这大大方便了工程设计。

Extrusion die is the key equipment of aluminum profile extrusion production. At present, design of profile extrusion die is mainly based on engineering analogy and experience accumulation in our nation, the designed die has to be tested and repaired frequently in order to adjust process parameters.

铝型材挤压模具是实现型材生产的关键技术装备，目前我国型材挤压模具的设计主要依赖类比设计和经验设计方法，所设计的模具必须经过反复的试模和修模才能满足工艺要求。